How to Replace a Garage Door Track

Replacing a garage door track may seem like a daunting task, but with the right tools and a little bit of know-how, it can be done easily and efficiently. Follow these step-by-step instructions to replace your garage door track.

Step 1: Disconnect the Garage Door Opener

The first step in replacing a garage door track is to disconnect the garage door opener. This can be done by pulling the emergency release cord, which will disengage the opener from the door.

Step 2: Remove the Old Track

Next, remove the old track by unscrewing the bolts that hold it in place. You may need to use a socket wrench or pliers to loosen the bolts. Once the bolts are removed, carefully slide the old track out of the way.

Step 3: Install the New Track

Now it’s time to install the new track. Slide the new track into place, making sure that it is aligned properly with the other tracks. Use the bolts that came with the new track to secure it in place.

Step 4: Adjust the Track

Once the new track is in place, you may need to adjust it to ensure that it is properly aligned with the other tracks. Use a level to make sure that the track is straight and adjust it as needed.

Step 5: Reconnect the Garage Door Opener

After the new track is installed and adjusted, it’s time to reconnect the garage door opener. Simply pull the emergency release cord back into place and the opener should automatically re-engage with the door.

Step 6: Test the Garage Door

Finally, test the garage door to make sure that it is working properly. Open and close the door several times to ensure that it is moving smoothly and that the new track is holding up.

In conclusion, replacing a garage door track may seem like a daunting task, but with these step-by-step instructions, it can be done quickly and easily. Remember to take your time and be patient, and you’ll have a fully functioning garage door in no time.